Industrial High Speed Spindle , 380V High Torque Servo Motor 13KG Weight

Industrial High Speed Spindle , 380V High Torque Servo Motor 13KG Weight

Stock terms: 

Usually our items are instock .But if it is not in stock occasionally, buyers need to accept the Refund or change the other items which are instock.

Applications:

Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the hardware, glassworks and woodworks.

Specifications:

Bearings mode: 2*7005   2*7003

Rotating speed: 9000-24000rpm 

Lubricating mode: grease
Spindle mode: NYM100-9-24Z/3.0
Spindle parametric:                                    Overall size(mm):
Frequency: 800Hz                                       D: 100
                        D1: 78
Power: 3.0Kw                                           L: 220
Voltage: 380V                                           L1: 37
Electric current: 8A                                      L2: 31
Connect mode : ER20
Tool holder’s diameter: 1-13mm(Factory standard: 2 fillings)
Taper hole of spindle runout: ≤0.003mm
Mandrel runout: ≤0.008mm
Cooling mode: water
Weight: 13KG

Description:

Assemble and install area’s temperature is controlled by the thermostatic air conditioner within accurate fit tolerance. Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessaryThe GDZ High Speed Motor Spindle researched and developed by our company has low noise and high accuracy characteristics. It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel chromium molybdenum alloying steels through standard heat treatment program to reach the requirement of high accuracy and stability. . Balance test should use the computerized balancer machine to check the precise balance of spindle with full speed. The assemble and install step is adjusted according to standard correction program when tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the spindle by adjust the nut. Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s pull accurately. The spindle leaving the factory is promised to run all for an integral test process so that the time of machine tool manufactors’ running time and machine tools delivery time could all be shortened.

Competitive Advantage:

Product features:

1,Adopt the ceramic core Aerial plug, more safe and reliable
2,Constant power spindle with low rotating speed and high torque; Low rotating speed used for drilling and milling or rough machining; High rotating speed used for engraving and milling or fine machining. This product has wide application.
3,Low noise, little vibration, good stability, high processing precision
4,The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. The durable years of the Bearings gets more longer.

5,Infinitely variable speed transmission for frequency changer with wide speed range

After-sale protection:

Bearing warranty last for half a year,Machine quality assurance last for a year.

Notes for Use of Motor Spindle: 

1,Before using the water-cooled motor spindle, it must be ensured that the cooling system is working properly and working without cooling condition is strictly forbidden. Cooling water calculate by 1 liter per kilowatt minute. The minimum flow rate of cooling water is not less than 5 liters per minute. The cooling water pipe and the water nozzle connection must be reliable to prevent leakage.
2,In the process of saving and transporting motor spindles, the high speed grease in the bearings could be changed. So before using, the spindles should run in low speed for a period time
Industrial High Speed Spindle , 380V High Torque Servo Motor 13KG Weight